Video Tag
Every video tagged “3D printing” in the library — a focused slice of the Halloween archive.
105 videos
This step-by-step tutorial walks viewers through building a full-size Ghostbusters proton pack using the free, open-source Q-Pack files designed by Marc Carabelli and Quentin Machiels. The creator covers the entire physical build process — from sourcing and prepping print files to assembly, filling, sanding, painting for screen-accurate results, and scratch-building the motherboard. A free resource guide and parts list are available via the creator's website. Electronics, lighting, sound, and weathering are promised in a follow-up video.
This sponsored build video follows the creator in reproducing Doc Brown's futuristic binoculars from Back to the Future 2 as a cosplay prop using the AnkerMake M5C 3D printer. The project leans on a purchasable Etsy model file and the printer's streamlined one-click workflow to keep the build accessible to beginners. The video doubles as a hands-on introduction to the AnkerMake M5C, highlighting its ease of setup and high-speed printing capabilities. The finished prop is a screen-accurate-looking replica suitable for BTTF cosplay.
VanOaksProps walks through a detailed, screen-accurate build of the Jedi Comlink seen in the hands of Qui-Gon Jinn and Obi-Wan Kenobi across two Star Wars prequel films. The foundation is a vintage Gillette Sensor Excel razor — the same found object used by the original prop department — enhanced with custom 3D-printed parts, laser-cut acrylic, and hard-to-find specialty hardware like Coughtrie screws and aerospace pins. The tutorial concludes with a full weathering sequence using primer, spray paint, and oil washes to achieve a convincingly worn, screen-matched finish. It's a masterclass in blending digital fabrication with traditional kit-bashing for obsessive prop accuracy.
VanOaksProps builds a DIY HoloProjector inspired by the aesthetic of Andor Season 2, combining 3D printing, laser cutting, and weathering techniques to create a screen-accurate sci-fi prop replica. The video appears to be a showcase or teaser, with the full step-by-step tutorial linked separately. The build incorporates electronics to achieve an authentic holographic display effect. It sits at the intersection of cosplay prop-making and Halloween/haunt set dressing for sci-fi themed spaces.
This tutorial walks through the creation of a wearable Trench Crusade Janissary helmet, built from a 3D model provided by Galactic Armory and printed on a Bambu X1C FDM printer. The finished piece is decorated with real gold leaf and hand-painted using Liquitex heavy body acrylics to achieve a grimdark aesthetic faithful to the Trench Crusade setting. The video appeals both to cosplayers looking to build impressive headpieces and fans of the tabletop game eager to translate its visual style into wearable form.
VanOaksProps builds screen-inspired light fixtures modeled after the Smuggler's Run ride at Galaxy's Edge, combining 3D-printed parts, acrylic tubing, and craft foam detailing to achieve a convincing in-universe look. The fixtures are brought to life with Linkind RGBTW smart bulbs, which allow programmable color scenes and automation to replicate the immersive atmosphere of the ride. The build is sponsored by Linkind and doubles as a charitable tie-in with the Jimmy Darts Kindness is Candy initiative.
A passionate Severance fan builds a fully functional replica of the iconic Lumon boardroom speaker from scratch, walking viewers through every stage from 3D printing and laser cutting to painting, texturing, and wiring in real audio electronics. The build uses a mix of digital fabrication and hands-on finishing techniques to closely match the on-screen prop. As a fun finale, the creator takes the finished piece to Bell Works in Holmdel, NJ — the real-world filming location for Lumon HQ — to gauge reactions. The video also honestly covers what went wrong during the build and how the replica compares to the actual show prop.
VanOaksProps walks through the complete build of a screen-accurate Galaxy's Edge-style wall light fixture, drawing inspiration from the Droid Depot and cast-member doors at Disneyland's Star Wars land. The project covers every stage from 3D-printing ABS parts and sanding them smooth, through priming, painting, and oil-paint weathering, to wiring a 24-LED NeoPixel ring driven by an ESP32 microcontroller with a free animated Arduino sketch. The result is a fully functional, prop-quality sci-fi light suitable for a themed room or display. A complimentary 3D model file and Arduino sketch are provided for viewers to replicate the build.
VanOaksProps walks through the construction of a display-quality C-3PO bust built from 3D-printed parts sourced from free Thingiverse models. The build covers surface prep with filler primer and multi-stage sanding, a multi-layer metallic paint finish, and the integration of acrylic light-panel material and LEDs for glowing eye inserts. Beacon Adhesives products are used throughout for assembly, with the finished piece destined for display at New York Comic Con.
SKS Props walks through the painting and weathering process for a 3D-printed Menpo (oni) mask, designed to complement a previously built samurai armor set. The mask was modeled in Nomad Sculpt as a learning exercise and printed in grey PLA on a Bambu H2S. The creator shares the finished result alongside the matching armor and offers the STL file for free download on MyMiniFactory.
VanOaks Props documents a creative crossover build inspired by a visit to Galaxy's Edge, combining a 3D-printed droid dome and a moisture vaporator form into a functional floor lamp. The build leans on PVC and ABS pipe for structure, with smart LED strip lighting for atmosphere. A layered painting and weathering process using spray paints, acrylic washes, and a metallic finish gives the prop its authentic Tatooine-worn look. The video also cross-promotes a companion lamp build by collaborator The Smuggler's Room.
This marathon compilation from VanOaksProps walks through the construction of six iconic movie props, including the Goonies Copper Bones, the Indiana Jones Holy Grail, Ghostbusters Ecto Goggles, Jack Torrance's axe from The Shining, Doc Brown's binoculars from Back to the Future Part II, and HAL9000 from 2001: A Space Odyssey. Each build showcases practical fabrication techniques including 3D printing, painting, weathering, and finishing aimed at achieving screen-accurate results. The format is a compiled deep-dive suited for makers at multiple skill levels looking to tackle cinematic replicas from scratch.
Part 3 of VanOaksProps' ambitious life-size Haunted Mansion door build explores the use of Polymaker's CosPLA filament, a specially formulated PLA designed to be easier to sand and finish than standard PLA. The creator shares hands-on impressions of the sponsored filament, highlighting its printability, durability, and sanding characteristics — qualities that are critical for achieving smooth, display-ready surfaces on a large-scale prop. This short update focuses specifically on material choice and surface prep rather than the full build process.
VanOaksProps revives a long-shelved project to complete a screen-accurate set of Ghostbusters Ecto Goggles, using a free Thingiverse 3D model as the foundation. The build focuses on hardware assembly — sourcing specific screws, snaps, and olive-colored belting straps — followed by a multi-layer paint and weathering process using acrylics and oil paint washes. The result is a wearable, movie-faithful replica suitable for cosplay or display. This video kicks off a new series dedicated to finishing abandoned prop builds.
This build video walks through recreating the Pre-Mor Holoprojector from Episode 3 of the Andor TV series as a handheld replica prop. The creator kitbashes a vintage Bandai handheld game as the prop's base, integrates functional LED lighting, and adds a 3D-printed bezel for screen accuracy. Layered spray paint and acrylic washes are used to achieve a weathered, lived-in Star Wars aesthetic.
This tutorial from VanOaksProps demonstrates how 3D modeling and printing can transform plain PVC haunt fences and gates into convincing, detailed props. The creator walks through the design process using 3D modeling software to craft custom decorative elements inspired by classic haunted mansion aesthetics. A ready-made 3D model is also available for purchase on Etsy for those who want to skip straight to printing. The approach is presented as accessible enough for haunters who haven't previously considered 3D modeling as part of their prop-building toolkit.
VanOaksProps recreates the control panel from the newly added storage lockers at Star Wars: Galaxy's Edge as a functional prop for a real locker. The build centers on a custom 3D-printed panel that is primed, layered with multiple spray paint colors, and finished with oil paint washes and Rub n Buff to achieve an authentic, weathered sci-fi look. Final assembly uses button-head screws and VHB tape to mount the panel cleanly. The result is a screen-accurate-style replica suitable for Star Wars-themed spaces or Halloween haunt set dressing.
VanOaksProps presents a marathon compilation of five prop builds inspired by the signage, lighting, and environmental details of Galaxy's Edge at Disneyland. Each segment breaks down a different build step-by-step, covering fabrication, painting, and weathering techniques to achieve an authentic Star Wars 'lived-in' look. The video draws on a mix of accessible materials — including EVA foam and 3D printing — to help home builders recreate the feel of an in-universe environment. Though not Halloween-specific, the set-design and prop-making skills translate directly to sci-fi haunt and themed-room builds.
This detailed build video walks through the full process of recreating Han Solo's Hoth Scanner prop from The Empire Strikes Back, combining FDM printing, resin printing, and real metal hardware for a screen-inspired replica. The creator covers prop research, surface preparation, and achieving convincing chrome and metallic finishes using accessible paints and buffing compounds. Assembly tips address structural durability, making the finished piece suitable for display or cosplay use.
A prop maker shares a work-in-progress knight helmet inspired by Brother Matthias from the video game Crimson Desert, modeled in Nomad Sculpt and printed on a Bambu Lab H2S. The video documents the early build stages, with painting planned as the next step. Wet sanding and spray painting are noted as finishing techniques to be applied. This is a short-form progress update rather than a full step-by-step tutorial.
VanOaksProps shares a personal top-5 list of tools that meaningfully improved their prop-making workflow in 2023. The roundup spans precision measurement, finishing, painting, electronics, and 3D printing. Each pick is framed around real-world maker use, making the list practical rather than purely aspirational. Affiliate links are provided for all featured items.
This is part three of a multi-part series documenting the build of a life-sized animatronic Velociraptor inspired by the Jurassic World raptor containment scenes. The episode focuses specifically on adding servo motors and a controller board to bring the dinosaur to life with realistic movement. The creator walks through integrating 3D-printed components and laser-cut parts into the animatronic rig. It sits within a broader home haunt project built in a garage setting.
VanOaksProps transforms a plain ice chest into a Star Wars-themed prop for a charity auction, giving it the look of Beskar-inspired hardware from the Star Wars universe. The build relies on airbrushing with Alumaluster chrome paint alongside a multi-color weathering approach to sell the worn, galactic aesthetic. Structural details are added using epoxy and craft materials before the final paint layers are applied. The finished cooler is destined for the Imperial Surface Bucket Bash charity event.
VanOaksProps walks through a full build of the iconic 57C Holocam — the detention block surveillance camera from Star Wars: A New Hope — using 3D-printed parts sourced from a third-party model file. The tutorial covers the complete workflow from raw prints to finished replica, including cleanup, priming, multi-step spray painting, masking, and final varnish. Attention to screen-accurate color and detail is central to the build. The result is a display-ready collector prop suitable for fans and prop builders alike.
