Video Tag
Every video tagged “controller” in the library — a focused slice of the Halloween archive.
70 videos
Travis from Fright Ideas walks through the PicoVolt controller's light mode, showing how the unit goes beyond motor and linear actuator control to also manage low voltage lighting. The short demonstration highlights the controller's multi-function flexibility for haunted house builders. It serves as a quick feature overview rather than a deep-dive tutorial.
The CS628 Coffin Skelly Pop Up from Poison Props is a professional-grade pneumatic animatronic featuring a skeleton corpse that rises and turns menacingly from a coffin to startle passing guests. The unit ships as a complete plug-and-play package, including the character, coffin, pneumatics, a programmed controller, and a motion sensor. An optional audio package adds a digital player, powered speaker, and scream effect for a fully immersive scare. Poison Props also notes that characters are interchangeable across their mechanisms, allowing haunters to adapt the prop to different themes.
FrightProps demos their Bullseye Paintball Target, filmed at the TransWorld Halloween and Attractions Show, showing it paired with a strobe alarm for visual feedback. The target is UV resistant and easy to clean, making it well suited for high-traffic haunt environments. An optional upgraded controller — compatible with audio-capable units like the PicoBoo — allows the prop to stay active until struck by a paintball, then shut off for a configurable period and trigger a custom sound bite. This makes it a plug-and-play interactive element for zombie paintball attractions.
This short tutorial from FrightProps covers how to configure the number of inputs on the EscapeKeeper escape room controller. The video walks viewers through the setup process for this dedicated escape room control system. At just three minutes, it delivers focused, practical guidance for those getting their EscapeKeeper unit operational.
FrightProps showcases their Press the Buttons escape room puzzle prop, a ready-to-use interactive device that challenges players to press colored buttons in the correct sequence. The short product spotlight highlights its core gameplay mechanic and suitability for escape room or haunted attraction environments. It appears to be a purchasable prop rather than a DIY build.
This short FrightProps video demonstrates the setup of the EscapeKeeper controller using a Mission Impossible-style scenario as a practical example. It appears to walk viewers through how the device can be configured to manage props and puzzles within an escape room environment. The brief runtime suggests it functions as a quick-start or product overview rather than an in-depth technical tutorial.
FrightProps showcases a wireless touchscreen word-lock puzzle designed for escape rooms and haunted attractions. The prop supports multiple password configurations, each mapped to a separate output on a companion Bluetooth controller. The wireless design eliminates the need for long or complex wire runs between the puzzle and its triggered effect.
The CC519 Corpse in the Closet is a ready-to-run pneumatic animatronic from Poison Props featuring a hidden corpse character concealed behind shutters. When triggered, the shutters burst open and the corpse lunges forward while its head sweeps side to side for a dramatic scare. The unit ships as a complete plug-and-play package including the character, pneumatics, a pre-programmed controller, and a motion sensor. It is designed for immediate deployment in professional or serious home haunt environments.
The FSL906 Fat Scab Lunger is a fully integrated commercial-grade pneumatic animatronic from Poison Props featuring a disturbing female character seated in a chair who violently rises into a 7-foot scissor lunge while tearing at her own scalp. The prop includes multiple animated elements — flailing arms and multi-directional head movement — designed to deliver an intense, unsettling scare. It ships as a complete plug-and-play package with the character, chair, pneumatics, programmed controller, and motion sensor included. An optional sound package with a custom MP3 player and powered speakers is also available.
Poison Props showcases their DPU416 De-Skinned animatronic, a pneumatically driven zombie figure that explosively unfolds from a compact resting state to full standing height in a matter of seconds. The unit ships as a turnkey package, including the character, pneumatic hardware, a pre-programmed controller, and a motion sensor. A custom scream sound effect is built in to amplify the jump-scare impact. The prop is designed to conceal easily in tight spaces, making it a versatile addition to professional haunt environments.
The Poison Props DP518 Drop Portrait Zombie is a plug-and-play haunted house animatronic featuring a wall-mounted portrait panel that drops to reveal a lurching ghoul beneath. The figure then lunges forward while its head moves in multiple directions, creating a startling multi-stage scare. The unit ships as a complete system including the character, drop panel wall unit, pneumatics, a pre-programmed controller, and a motion sensor. Optional audio upgrades are available for those wanting custom sound.
PoisonProps.com showcases the DD829 Dr. Disembowelment, a fully pneumatic haunted house animatronic featuring a mad-doctor character who suddenly turns and lunges approximately five feet over a table while shaking intestines toward passing guests. The prop arrives as a complete plug-and-play package including the character figure, pneumatic components, a pre-programmed controller, and a motion sensor. An optional sound package with a digital player and powered speaker is also available. The table and victim figure are sold separately.
The Poison Props CD514 Creeper Descender is a ready-to-run haunted attraction animatronic that drops from an overhead position down toward patron eye level while its head rotates side to side for maximum scare impact. The unit ships as a complete, plug-and-play package including the character costume, pneumatic hardware, a pre-programmed controller, and a motion sensor trigger. Designed for professional haunt environments, it requires overhead mounting space to accommodate the full descent range. No custom fabrication or programming is needed out of the box.
Poison Props showcases the ADP939 Autopsy Pop-Up Deluxe, a professional-grade pneumatic animatronic featuring a sheet-covered corpse that dramatically sits upright with realistic head movement. The prop arrives as a plug-and-play unit, bundled with the character, sheet, pneumatics, a pre-programmed controller, and a motion sensor. An optional sound package and add-on table are also available. The result is a highly organic, unsettling effect suited for haunted attractions and dark ride environments.
The DG739 Door Grabbers from Poison Props is a commercial-grade pneumatic Halloween prop featuring a chained door that is violently forced open by three wildly grasping hands. The self-contained unit ships as a plug-and-play system, including the door and rig, pneumatics, a programmed controller, and a motion sensor. Optional upgrades include custom sound, a digital sound player, and a powered speaker. The rig's footprint makes it suitable for haunted house corridors and dark ride installations.
This video showcases the GBA905 Ground Breaker Attack animatronic from Poison Props, a commercial-grade pneumatic zombie prop designed for graveyard-themed displays. The figure rises from a partially buried position, pushing upward while its head lifts and turns side to side for an unsettling, lifelike effect. The unit ships as a complete package including the character, pneumatics, a pre-programmed controller, and a motion sensor. An optional sound package with a digital player and powered speakers is also available.
The CSU902 Coffin Sit Up Attack from Poison Props is a fully integrated pneumatic animatronic prop featuring a corpse that rises from a coffin and turns toward guests with an organic side-to-side head shake. The unit ships as a complete plug-and-play package, including the character, coffin, pneumatics, a pre-programmed controller, and a motion sensor. An optional sound package with a digital player and powered speaker is also available. The prop's compact footprint makes it a practical choice for haunted houses, graveyard scenes, and dark rides.
The PL738 Psycho Lunger from Poison Props is a fully pneumatic haunted attraction prop featuring a deranged axe-wielding character that activates from a head-down resting position, lifts and wildly turns its head, then lunges forward roughly five feet while swinging a bloody axe. The unit ships as a complete plug-and-play package including the character, pneumatic hardware, a programmed controller, and a motion sensor. Optional digital sound components are available for enhanced atmosphere. Character heads are interchangeable across mechanisms, offering customization flexibility.
PoisonProps showcases their PU101 Raincoat Zombie Pop Up, a commercial-grade pneumatic prop that deploys from a compact folded position to a full six-foot zombie in seconds. The prop is inspired by classic horror imagery and ships as a complete ready-to-run package including the character, pneumatics, a programmed controller, and a motion sensor. It requires a standard AC power connection and a compressed air supply at 100 psi to operate. Optional upgrades for custom digital sound and a powered speaker are also available.
The EFL730 Electric Fence Lunger from Poison Props is a professional-grade pneumatic haunted house animatronic featuring a ghoul character that conceals itself several feet back before launching forward, raising its arms into an electric fence rig complete with shaking, sparks, and strobe effects. The entire sequence is triggered by a motion sensor and managed by a pre-programmed controller, making it a true plug-and-play installation. Optional audio components including an MP3 player and powered speaker are available for enhanced immersion. The combined rig footprint is compact enough for tight haunt floor plans.
The ML919 Mummy Lunger from Poison Props is a professional-grade pneumatic animatronic featuring a female mummy character that begins in a dormant, head-down pose before dramatically lifting her head, raising her arms, and lunging forward approximately four feet on a scissor mechanism. The unit ships as a plug-and-play system, including the character, pneumatics, a programmed controller, and a motion sensor. An optional sound package with a digital player and powered speaker is also available. It requires a standard AC power connection and a compressed air supply at around 100 psi.
Poison Props showcases the MR930 Monster's Revenge, a large-scale commercial animatronic featuring two characters in a violent, theatrical sequence: a monster decapitates a victim, the victim pitches forward spraying water on nearby guests, and the monster swoops down with flailing arms. The unit ships as a complete plug-and-play package including pneumatics, a pre-programmed controller, a motion sensor, and an optional digital sound system with powered speaker. Its substantial footprint makes it suited to professional haunted attractions, dark rides, or large home haunts with adequate space and air supply.
